|
Features:
Monitor:
Specifications：
Screen size: 3.5 inch (diagonal length)
Aspect Ratio : 4 : 3 image
Input:2 ways video inputs
System: PAL & NTSC auto-switching
Resolution: 320 x R.G.B x 240 dots
High resolution, digital panel
Power supply: DC 12 V
Remote control, OSD menu;
Compact design
Sunshade design around
switch function stand
CMOS Camera for 90 degree
Camera with night vision
Monitor Size 100mm x 80mm
The base unit is shipped with a 5m RCA cable when sent with either of the cameras pictured below:
NOTE THAT 2.4MgHtz IS AUSTRALIAN STANDARD.
Bullet Camera
|
Number Plate Camera
|
GENERAL CONNECTIONS FOR ALL MONITORS:
Both Camera and monitor need to be powered by connecting
Red - Positive
Black - Negative
If the cable does not have Red/Black wires then you will need to test using a millimeter. The inside of the plug is positive, the outside negative
Some monitors also have a green wire which, when connected to the positive side of the reversing light will make the camera display on input no 2. If connecting a second camera then this wire should not be connected (or a simple switch put in to disable it when the second camera is connected). The monitor can be manually turned on to display the camera at any time and can be left on whilst driving.
The connection between the camera and the monitor is via a simple RCA cable. Only the YELLOW is used.
If more instructions are needed then you should be getting this unit professionally installed
Of course all items supplied should be tested BEFORE installation.
|
OR
