PLT-5
Powered LAT Subwoofer System
|
Features
- Designed for Pick-up Trucks
- Line Level Stereo RCA
- Speaker Level Balanced Input
- Input Selector Switch
- Level Control
- Auto ON Circuit (Signal Detection)
- Variable LP Filter (4th Order)
- Variable Bass Boost
- Fixed Internal Bass Shelf Filter for Driver Compensation
- Subsonic HP Filter
- Remote Variable Bass Control
- Phase Switch
- LED Indicators
- 8GA Power & Ground Insert Terminals
- 16GA Remote Trigger Input
- Speaker Outputs (Faston Connectors)
Amplifier
- RMS Continuous Power: 250W, 2Ohm load at 14.4V
Crossover
- Crossover: LPF variable (50Hz - 200 Hz) 24dB / oct
- Subsonic Filter: Fixed 15Hz, 24dB/ oct
- Bass EQ: 45Hz, variable 0 to + 12dB
General
- Total Harmonic Distortion: 0.01%
- S/N Ratio (IHF A weighted): 100 dBA
- Efficiency: >80%
- Input Voltage Range: 9-18V DC
- Input Impedance: 10Ohm (line level)
- Frequency response (=0, -1dB): 10-1kHz
- Input: RCA and Speaker Level (0.2Vrms-20Vrsm)
- Remote Gain Control: Dash Mount variable 0 to -12 dB
- Phase: 0/ 180‡
- Remote Turn-On: Auto-ON circuit and 12V remote trigger
- Power Indication: Blue LED
- Protection: Temperature, Over-current, Over-Voltage
- Fusing: Dual ATC type
- Power Terminals: 8gauge, insert type
- Terminal / Connection Layout: Front side (all)
Subwoofer
- Impedance: 4ohm + 4 ohm
- Diaphragm : TBD
- Cone Area (Sd) TBD
- Xmax (one way linear): TBD
- Sensitivity: TBD
- Frequency response: TBD
- Frame: Cast Aluminum
- Motor Structure: (2) Double Stacked Strontium Ferrite
- Dimensions: TBD
Enclosure
- Design: Ultra-Reflex
- Construction: Dual chamber (sealed, vented)
- Materials: MDF, High-Temp ABS, Plexi-glass
|
